REACH TRUCK

RWR / RHWS Series Walkie Reach Truck

Capacities:

• RHWS capacities: 3,000 to 4,000lbs
• RWR capacities: 3000lbs
• Available fork lengths: 36", 42", 48"
• Lift heights: 63" to 160"

NARROW AISLE WALKIE STACKERS
When racking operations call for heavier loads, steady use and no time for down time the truck to use is the RHWS Series Narrow Aisle Stacker. The RHWS has been designed to provide pallet stacking at an economical cost and when used with properly designed racking can drastically lower product handling and storage costs. RHWS stackers can even replace costly to buy and maintain rider type narrow aisle machines. Safe and easy to operate the RHWS is operator friendly and can be used with a minimum of training. It is ideally suited to backroom use in food stores or other applications where casual labor and unsupervised night time employees move and store product.

WHEELS AND TIRES

• Press-on 10" x 4" (254 mm x 102 mm), white non-marking drive tire, taper mounted hub design for fast easy servicing
• Taper mounted drive tire hub design for fast easy servicing
• Poly straddle wheels 4" x 3" (102 mm x 76 mm)with precision sealed ball bearings

SOLID STATE SPEED CONTROLLER

• Programmable, high power, high efficiency for energy saving motor and battery operation
• Allows battery efficiency and usage to increase by up to 50%
• Smooth, stepless, adjustable travel speeds and acceleration rate
• Diagnostic test and fault information
• Smooth controlled plug braking

HYDRAULIC SYSTEM

• Heavy duty motor, gear pump, check and relief valve
• Lifting and lowering functions feature manual lever controls for load feathering capabilities

CONTROL HANDLE

• Ergonomic design with dual forward/reverse travel controls for thumb or twist operation
• Large safety reversing button propels truck away from operator and sounds horn if contact with operator made while unit is in reversing mode
• Automatic "dead man" braking with power cut-off switch when brake is applied

STRADDLE LEGS

• Adjustable to 50" (1,270 mm) with guarded tips to protect straddle wheels
• Heavy duty 4" (102 mm) wide straddles

TRAVEL SPEEDS

• Infinitely variable stepless forward and reverse control
• Programmable electronics allow custom setting of speeds

DRIVE UNIT / TRANSMISSION

• Totally sealed gear reducer / brake system with internal multi-disc brakes in oil bath that eliminates conventional brake safety problems such as adjustments, drum and / or shoe replacement
• All gear and brake components protected from exposure to moisture and dirt, packaging, strapping etc.
• All gears are precision ground helical gears
• Drive axle mounted on precision tapered roller bearings

ELECTRICAL SYSTEM

• 24 volt
• On/Off Key switch
• Solid state programmable speed controller with solid state throttle mechanism
• Emergency power disconnect button
• Fused drive and control circuits
• Series wound high torque maintenance free drive motor, Class H insulation
• Heavy duty motor contactors with replaceable tips

FORKS, MAST AND CARRIAGE

• Heavy duty nested I-beam design
• 42" (1,067 mm) forged forks
• ITA Class II hook type mounting carriage
• Dual leaf style lifting chain with 5:1 safety factor
• 40" (1,016 mm) high load backrest

OPTIONAL EQUIPMENT

• 36"(914 mm) and 48" (1,219 mm)long forged forks
• Hour meter
• Hour meter/discharge indicator
• Hour meter/discharge indicator/lift lockout
• U.L. EE rating
• Siped, traction and non-marking drive tires
• Flashing light and beeper
• Consult factory for other options

VERSATILITY
RWR Series Walkie Reach Truck is available for applications where pallet widths vary in size and exceed the existing straddle width setting, or where bottom rack stringers do not exist. The 24" (610 mm) heavy duty reach mechanism that includes 2º forward and 6º back tilt forks, features internal hosing that replaces conventional, high maintenance, externally mounted hose reels. Tilt forks make load handling easier and the reach action is cushioned for steady and controlled load extension and retraction.

ERGONOMICS
The RHWS Series Walkie Stacker provides ergonomically dimensioned wider handle grips that easily accommodate bulky, gloved hands and greatly increase the operator’s comfort and efficiency. All control buttons and thumb controls are located within easy fingertip reach from either side without lifting a hand from the grips. The bright red reversing button is oversized for a more positive contact surface. Large manual lever controls for lift, lower and reach (RWR Series) are mounted on the dash and easily accessible.